---
title: Setting up OpenWRT
description: 
---

Uploaded the OpenWRT firmware to your router and not sure what to do next? On this page we help you set an OpenWRT password and enable Wi-Fi.

## Network Cable

By default, OpenWRT does not enable any Wi-Fi network. You'll need to connect a network cable from your computer to the LAN port of your router to get through these first steps.

## Login

Open [http://192.168.1.1](http://192.168.1.1) in your web browser. The default login uses username **root** and no password.

![](https://media.vpx.moe/418/Screenshot-2026-06-07-at-08.47.04.png)

## Update Checks

The router asks your permission to automatically check for firmware updates. This is not required, but probably a good idea.

![](https://media.vpx.moe/421/Screenshot-2026-06-07-at-08.47.32.png)

![](https://media.vpx.moe/424/Screenshot-2026-06-07-at-08.47.44.png)

## Password

You don't want visitors changing your Wi-Fi settings, to lets set a password.

![](https://media.vpx.moe/427/Screenshot-2026-06-07-at-08.48.06.png)

Enter the password twice and click **Save**.

![](https://media.vpx.moe/430/Screenshot-2026-06-07-at-08.48.34.png)

## Setup Wi-Fi

OpenWRT allows you to change thousands of parameters. It can be tempting to want to "optimize" your settings immediately, but we highly recommend you refrain from doing so at this point. A single wrong setting can make your router unreachable. Lets get the basics working first.

Navigate to **Network** > **Wireless**. 

You'll find 1, 2, 3 or sometimes 4 different Wi-Fi radios, each accompanied with its own SSID settings. The 802.11b/g radio is compatible with most devices, so lets configure that SSID first.

Click **Edit** for the 802.11b/g SSID.

![](https://media.vpx.moe/433/Screenshot-2026-06-07-at-08.49.22.png)

Please ignore the plethora of settings. **Resist the temptation!** One wrong setting can result in days of troubleshooting.

* Scroll down to **Interface Configuration** and switch to the **Wireless Security** tab.
* Switch the **Encryption** to **WPA2-PSK/WPA3-SAE Mixed Mode**.
* Enter Wi-Fi password into the **Key** field.
* Click **Save**.

![](https://media.vpx.moe/436/Screenshot-2026-06-07-at-08.50.18.png)

Now **Apply** the saved settings. We're almost there.

![](https://media.vpx.moe/439/Screenshot-2026-06-07-at-08.50.33.png)

Finally, **Enable** the SSID.

![](https://media.vpx.moe/442/Screenshot-2026-06-07-at-08.50.54.png)

**Success**! We can now connect to our OpenWRT Wi-Fi.

![](https://media.vpx.moe/445/Screenshot-2026-06-07-at-08.51.15.png)

You may repeat these steps for the other radios.

## Note on Radios

Different radios rely on different OpenWRT radio drivers. The quality of these drivers may vary and in some cases it's recommended to disable a "bad radio". Please consult the OpenWRT forum for your particular router to see if any such recommendations exist.